proxmark3 / RFID Cloner / tags / UID changeable card

2013年6月11日星期二

HID iclass card cloner software

Clone standard security iclass card only!

See clone details step by step here:

1. connect the OMNIKEY 5321 reader to computer, and install the driver.

2. place a card that you want to clone to the reader, and read the card.

3. write the content to a new iclass card(usually the block 5,block 6,block 7 block 8 and block9) you can check the difference of the two cards.

For further information you need, please contact with us.
website: www.xfpga.com
email: xfpga@hotmail.com

2013年6月10日星期一

Indala card cloner

How to clone the indala cards? here, step by step.

1. connect the antenna to device and connect the device to computer.

2. connect the device to computer and update the driver.

Choose the last(usually it is the last one) “USB Human Input Devices”and update the driver to our indala cloner driver.

3. After successfully install the driver, you will see a device on the device list:

4. open the software,click the cmd.bat and start the software

5. read a indala card, place the card on the antenna and input the commands.

“lf read”

“data sample 4000”

“lf indalademod”

6. clone a indala card to a T5557 card. Place the blank T5557 card to the antenna and input the following commands

“lf indalaclone xxx” xxx is the number you obtain above.

For further information you need please contact with us, thanks.

www.xfpga.com

xfpga@hotmail.com

2013年5月16日星期四

EMDB409 Reader - EM4305 Reader - EM4450 EM4205 EM6869 Reaer

Supported tag:

EM4095, EMDB409, ISO 11784/ 11785, Animal mode, Read Only, EM4200,
EM4450, EM4205, EM4305, EM6869

Read distance is more than 5 cm!

Schematics download: http://www.xfpga.com/html_products/EMDB409-Reader-en-94.html

A quick vedio to learn to how to use it

http://youtu.be/s8MEgQENjXI

Proxmark3

Read just about any RFID tag
Pretend to be a reader or a tag
Sniff communications between a reader and tag
Operate in standalone mode without a PC (USB battery required )

The hardware includes an ARM processor, FPGA, 4 LEDs, a button, JTAG port, and two USB ports. The USB ports provide for power, communication with a PC, and an antenna hookup. High and low frequency antennas can be connected through the hirose (4-pin) USB port. Antennas can be made at home or purchased from this web shop.

All devices use a 47pF capacitor in their HF circuit. The high frequency antenna sold through this online shop is compatible with both circuit configurations.

All boards are tested to function correctly before shipping and are flashed with the latest firmware avaialbe at the time. The Proxmark also boasts an active user community and comprehensive documentation.

commands for hf cards

commands for mifare card

read and write a mifare card

use hf mf chk to find default key

use hf mf nested to crack a mifare card

use hf mf dump to dump a mifare card.

Proxmark3 suit content

proxmark3 board
Mini USB cable (for connect computer)
LF and HF antennas
LF and HF test cards