Handheld 125Khz RFID Copier ID card cloner

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format.

GENERAL DESCRIPTION 

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format. 

Support Tag

- 125K EM4100 or compatible protocol

Feature

• Support 125Khz EM4100 or compatible card format only 

• Standalone 2 buttons Simple operation 

• don’t need connect with computer for operation 

• Built-in LED and buzzer indicator 

• Built-in transceiver antenna 

• Battery power : 3V ( 2 x AAA battery ) 

• No external power is needed 

• Portable design / size : (115 x 70 x 30) mm 

Operation Manual – duplicate a EM4100 Card ID

[1] insert 2 x AAA battery

[2] power switch on (Power LED will flash per second) 

[3] Place a EM4100 or compatible card on the reader’s detection area . 

[4] press “Read” button , 

If the card format is correct , “Read” LED will on and “beep” 

(If the card is not supported , No response from the reader) 

[5] take away the EM4100 card and place a 125K RW card on the reader’s detection area. 

Press “Write” button about ~1-2 second “Write LED” will keep on , 

If write success , “write LED” will flash and beep 4 times. 

(If card type is incorrect , No response from the reader)

Software and Device for crack and copy Mifare 1k S50 UID

Mifare / Transportation card / Access cards cloner

• Incredible! this device can crack mifare card,Transportation card,  Access cards, and copy the card to a new uid changeable mifare card. 
• This software supports ACR122U (the SDK with itself cannot change UID and copy) NFC contactless smart card reader, with this device , the software can change and remodified the UID of the changeable UID Miare 1k S50 cards .

Simply operation:

1. Install the driver and connect the device to computer, the device's light is red when there are not card on the reader, the light is green when there are card on the reader.

mifare cloner with UID changeable mifare 1k card with backdoor

mifare cloner with UID changeable mifare 1k card with backdoor(keyfob)

2. Connect the u-disk to computer when open the software.

3. mifare cracker

 mifare-cracker.exe

The software is written by net, so you need to install net framework 3.5 or above.

Double click the software and open it, connect the reader to the computer.

Place the card to be cracked to the reader, and the reader’ light is green.

Click the CrackCard button and start crack, their will be progress on the soft,
when finished there will be showed on the top of the software.

The crack time will take about 1-15 minute, depending on the number of sectors 

that need to be cracked.

After successfully crack, there will be a file generated by the software, you can see it on the directory of C: (you can change it to other directory)

This file is the content of the card.

4. Copy 2 UIDCard.exe

Connect the reader to computer and place a UID card to the reader. 

open the software.

Click Initialize and connect, then brown the dump file of the card to be copied.

You can change the content of on the right window,  use the CopyCard button to copy the content to the UID changeable mifare card. mifare Tool.exe (read & write ordinary mifare card, used with acr122u)

ID / HID / AWID card cloner portable

• AWID card, EM 4100 ID card HID card copier portable, used battery for power.
• It can copy AWID card, LF HID card and EM card, both of them are LF card(125khz).
• The usage is the same as the portable ID card copier.

Can not copy HID indala card!

Feature

• Duplicate the card ID from the LF HID card and EM4100/TK4100 card or keyfob for backup purpose
• Support 125KHz HID CARD, EM4100 or compatible card format

A quick video of this copier in action

http://www.facebook.com/photo.php?v=116096655253257&set=vb.100005587693138&type=2&theater

125Khz RFID Honeywell HID & EM4100 Card / Tag Reader, Writer, Copier / Cloner!

Incredibly Easy to Read / Edit / Copy / WRITE RFID HID & Rosslare Tags

The most advanced RFID reader / writer available!Clone access cards / tags in seconds!

Duplicate 125Khz HID (Honeywell) and EM4100 (Rosslare and other RFID companies) cards and tags. 
Easy to use. Simply read it, and then write it. You can even edit the string to create new variations!

Application

• backup or duplicate the HID proxcard ID 
• customer made the HID card with own or continuous serial no.

Features
•  protocol support 
- program “HI-RW-T1” as HID Proxcard wiegand format 
•  - wiegand format support : 24,26,32,34,35,36,37 and 40 
•  USB 1.1/2.0 interface (virtual com port)
- no external power source needed 
- need USB driver installation 
•  Built-in LED and buzzer 
•  Built-in transceiver antenna 
•  Read/write distance : ISO card (~2-3 cm) 
•  Free programmer program 
•  Card size version (95x60x10)mm -- It's a small device

The device is connected to computer via a mini USB cable, not batterry needed.

See how to use it

1. plug the device to computer and install the driver.

[1] install the following USB driver before connect the readerto PC
run CD path:\USB driver\CH341SER.EXE
[2] after driver installation , connect the reader to PC through the USB cable
[3] it will detect and install the “USB to serial “ virtual com port driver automatically
[4] a “virtual com port” will be found from the device manager as follow :
(Remarks : writer program can support com port number 1-16 only)