Proxmark3

1. Read just about any RFID tag
2. Pretend to be a reader or a tag
3. Sniff communications between a reader and tag
4. Operate in standalone mode without a PC (USB battery required )

The hardware includes an ARM processor, FPGA, 4 LEDs, a button, JTAG port, and two USB ports. The USB ports provide for power, communication with a PC, and an antenna hookup. High and low frequency antennas can be connected through the hirose (4-pin) USB port. Antennas can be made at home or purchased from this web shop.

All devices use a 47pF capacitor in their HF circuit. The high frequency antenna sold through this online shop is compatible with both circuit configurations.

All boards are tested to function correctly before shipping and are flashed with the latest firmware avaialbe at the time. The Proxmark also boasts an active user community and comprehensive documentation.

commands for hf cards

commands for mifare card

read and write a mifare card

use hf mf chk to find default key

use hf mf nested to crack a mifare card

use hf mf dump to dump a mifare card.

Proxmark3 suit content

• proxmark3 board
• Mini USB cable (for connect computer)
• LF and HF antennas
• LF and HF test cards

Proxmark3

1. Read just about any RFID tag
2. Pretend to be a reader or a tag
3. Sniff communications between a reader and tag
4. Operate in standalone mode without a PC (USB battery required )

The hardware includes an ARM processor, FPGA, 4 LEDs, a button, JTAG port, and two USB ports. The USB ports provide for power, communication with a PC, and an antenna hookup. High and low frequency antennas can be connected through the hirose (4-pin) USB port. Antennas can be made at home or purchased from this web shop.

All devices use a 47pF capacitor in their HF circuit. The high frequency antenna sold through this online shop is compatible with both circuit configurations.

All boards are tested to function correctly before shipping and are flashed with the latest firmware avaialbe at the time. The Proxmark also boasts an active user community and comprehensive documentation.

commands for hf cards

commands for mifare card

read and write a mifare card

use hf mf chk to find default key

use hf mf nested to crack a mifare card

use hf mf dump to dump a mifare card.

Proxmark3 suit content

• proxmark3 board
• Mini USB cable (for connect computer)
• LF and HF antennas
• LF and HF test cards

EMDB409 Reader

EMDB409 Reader EMDB409E_MK4 EM4305 / EM4205 Reader

Supported tag:

EM4095, EMDB409, ISO 11784/ 11785, Animal mode, Read Only, EM4200, 
EM4450, EM4205, EM4305, EM6869 

Read distance is  more than 5 cm!

Schematics download: http://www.xfpga.com/html_products/EMDB409-Reader-en-94.html

1. Read a EM4200/EM4100 card

2. Read a EM4305 keyfob

All tag supported by software:

Read a EM4200 ID card

Read a EM4305

Access induction ID card within T5577 chip can work with HID duplicator

it's access induction ID card within T5577 chip can work with HID duplicator

Feature:

chip: PROX
frequency: 125KHZ
distance: 2-10mm
temperature: -50°- 85°F (-45°- 70° C)menory: 84bits
access: >100,000次
lift: >10年
packing: PVC\ABS

UID changeable mifare 4K card S70 card

1.Uid changable mifare 4K card S70 card.

2.use proxmark3 to read and write the uid with the default key FFFFFFFFFFFF

2.1 Read & write block 65 

2.2 Just change it like you change block 1 and block2

3. Use acr122u to read and write it.

UID changeable mifare 1k card block0 writable

1. UID changeable mifare 1k card block0 writable

 2. Use proxmark3 to read and write the uid with the default key FFFFFFFFFFFF

Just change it like you change block 1 and block2

3. Use acr122u to read and write it.

UID changeable mifare 1k card with backdoor

• It is used as a mifare card, it has backdoor to change the uid of the card.
• you can use libnfc' command nfc-mfsetuid to change the uid of the card
• Works exactly like the Mifare S50, with 16 Sectors and 4 Blocks each Sector, but the Sector 0 Block Zero known as Manufacturers Block where the Chip UID is stored, can be re programmed to any UID you wish.
• This is a perfect solution for a lost irreplaceable Mifare Cards ID, you don't need to re-enroll new cards. Just program this new Mifare 1K's UID to the UID of lost card then you have a new Exactly the same card.

A quick video of this copier in action

http://youtu.be/Pj51Os0omR0

Change the uid with proxmark3