EMDB409 Reader - EM4305 Reader - EM4450 EM4205 EM6869 Reaer

Supported tag:

EM4095, EMDB409, ISO 11784/ 11785, Animal mode, Read Only, EM4200, 
EM4450, EM4205, EM4305, EM6869 

Read distance is  more than 5 cm!

Schematics download: http://www.xfpga.com/html_products/EMDB409-Reader-en-94.html

A quick vedio to learn to how to use it

http://youtu.be/s8MEgQENjXI

Proxmark3

1. Read just about any RFID tag
2. Pretend to be a reader or a tag
3. Sniff communications between a reader and tag
4. Operate in standalone mode without a PC (USB battery required )

The hardware includes an ARM processor, FPGA, 4 LEDs, a button, JTAG port, and two USB ports. The USB ports provide for power, communication with a PC, and an antenna hookup. High and low frequency antennas can be connected through the hirose (4-pin) USB port. Antennas can be made at home or purchased from this web shop.

All devices use a 47pF capacitor in their HF circuit. The high frequency antenna sold through this online shop is compatible with both circuit configurations.

All boards are tested to function correctly before shipping and are flashed with the latest firmware avaialbe at the time. The Proxmark also boasts an active user community and comprehensive documentation.

commands for hf cards

commands for mifare card

read and write a mifare card

use hf mf chk to find default key

use hf mf nested to crack a mifare card

use hf mf dump to dump a mifare card.

Proxmark3 suit content

• proxmark3 board
• Mini USB cable (for connect computer)
• LF and HF antennas
• LF and HF test cards

Proxmark3

1. Read just about any RFID tag
2. Pretend to be a reader or a tag
3. Sniff communications between a reader and tag
4. Operate in standalone mode without a PC (USB battery required )

The hardware includes an ARM processor, FPGA, 4 LEDs, a button, JTAG port, and two USB ports. The USB ports provide for power, communication with a PC, and an antenna hookup. High and low frequency antennas can be connected through the hirose (4-pin) USB port. Antennas can be made at home or purchased from this web shop.

All devices use a 47pF capacitor in their HF circuit. The high frequency antenna sold through this online shop is compatible with both circuit configurations.

All boards are tested to function correctly before shipping and are flashed with the latest firmware avaialbe at the time. The Proxmark also boasts an active user community and comprehensive documentation.

commands for hf cards

commands for mifare card

read and write a mifare card

use hf mf chk to find default key

use hf mf nested to crack a mifare card

use hf mf dump to dump a mifare card.

Proxmark3 suit content

• proxmark3 board
• Mini USB cable (for connect computer)
• LF and HF antennas
• LF and HF test cards

EMDB409 Reader

EMDB409 Reader EMDB409E_MK4 EM4305 / EM4205 Reader

Supported tag:

EM4095, EMDB409, ISO 11784/ 11785, Animal mode, Read Only, EM4200, 
EM4450, EM4205, EM4305, EM6869 

Read distance is  more than 5 cm!

Schematics download: http://www.xfpga.com/html_products/EMDB409-Reader-en-94.html

1. Read a EM4200/EM4100 card

2. Read a EM4305 keyfob

All tag supported by software:

Read a EM4200 ID card

Read a EM4305

Access induction ID card within T5577 chip can work with HID duplicator

it's access induction ID card within T5577 chip can work with HID duplicator

Feature:

chip: PROX
frequency: 125KHZ
distance: 2-10mm
temperature: -50°- 85°F (-45°- 70° C)menory: 84bits
access: >100,000次
lift: >10年
packing: PVC\ABS

UID changeable mifare 4K card S70 card

1.Uid changable mifare 4K card S70 card.

2.use proxmark3 to read and write the uid with the default key FFFFFFFFFFFF

2.1 Read & write block 65 

2.2 Just change it like you change block 1 and block2

3. Use acr122u to read and write it.

UID changeable mifare 1k card block0 writable

1. UID changeable mifare 1k card block0 writable

 2. Use proxmark3 to read and write the uid with the default key FFFFFFFFFFFF

Just change it like you change block 1 and block2

3. Use acr122u to read and write it.

UID changeable mifare 1k card with backdoor

• It is used as a mifare card, it has backdoor to change the uid of the card.
• you can use libnfc' command nfc-mfsetuid to change the uid of the card
• Works exactly like the Mifare S50, with 16 Sectors and 4 Blocks each Sector, but the Sector 0 Block Zero known as Manufacturers Block where the Chip UID is stored, can be re programmed to any UID you wish.
• This is a perfect solution for a lost irreplaceable Mifare Cards ID, you don't need to re-enroll new cards. Just program this new Mifare 1K's UID to the UID of lost card then you have a new Exactly the same card.

A quick video of this copier in action

http://youtu.be/Pj51Os0omR0

Change the uid with proxmark3

Handheld 125Khz RFID Copier ID card cloner

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format.

GENERAL DESCRIPTION 

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format. 

Support Tag

- 125K EM4100 or compatible protocol

Feature

• Support 125Khz EM4100 or compatible card format only 

• Standalone 2 buttons Simple operation 

• don’t need connect with computer for operation 

• Built-in LED and buzzer indicator 

• Built-in transceiver antenna 

• Battery power : 3V ( 2 x AAA battery ) 

• No external power is needed 

• Portable design / size : (115 x 70 x 30) mm 

Operation Manual – duplicate a EM4100 Card ID

[1] insert 2 x AAA battery

[2] power switch on (Power LED will flash per second) 

[3] Place a EM4100 or compatible card on the reader’s detection area . 

[4] press “Read” button , 

If the card format is correct , “Read” LED will on and “beep” 

(If the card is not supported , No response from the reader) 

[5] take away the EM4100 card and place a 125K RW card on the reader’s detection area. 

Press “Write” button about ~1-2 second “Write LED” will keep on , 

If write success , “write LED” will flash and beep 4 times. 

(If card type is incorrect , No response from the reader)

Software and Device for crack and copy Mifare 1k S50 UID

Mifare / Transportation card / Access cards cloner

• Incredible! this device can crack mifare card,Transportation card,  Access cards, and copy the card to a new uid changeable mifare card. 
• This software supports ACR122U (the SDK with itself cannot change UID and copy) NFC contactless smart card reader, with this device , the software can change and remodified the UID of the changeable UID Miare 1k S50 cards .

Simply operation:

1. Install the driver and connect the device to computer, the device's light is red when there are not card on the reader, the light is green when there are card on the reader.

mifare cloner with UID changeable mifare 1k card with backdoor

mifare cloner with UID changeable mifare 1k card with backdoor(keyfob)

2. Connect the u-disk to computer when open the software.

3. mifare cracker

 mifare-cracker.exe

The software is written by net, so you need to install net framework 3.5 or above.

Double click the software and open it, connect the reader to the computer.

Place the card to be cracked to the reader, and the reader’ light is green.

Click the CrackCard button and start crack, their will be progress on the soft,
when finished there will be showed on the top of the software.

The crack time will take about 1-15 minute, depending on the number of sectors 

that need to be cracked.

After successfully crack, there will be a file generated by the software, you can see it on the directory of C: (you can change it to other directory)

This file is the content of the card.

4. Copy 2 UIDCard.exe

Connect the reader to computer and place a UID card to the reader. 

open the software.

Click Initialize and connect, then brown the dump file of the card to be copied.

You can change the content of on the right window,  use the CopyCard button to copy the content to the UID changeable mifare card. mifare Tool.exe (read & write ordinary mifare card, used with acr122u)