Handheld 125Khz RFID Copier ID card cloner

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format.

GENERAL DESCRIPTION 

It is designed to backup or duplicate the card ID from the EM4100 or compatible card format. 

Support Tag

- 125K EM4100 or compatible protocol

Feature

• Support 125Khz EM4100 or compatible card format only 

• Standalone 2 buttons Simple operation 

• don’t need connect with computer for operation 

• Built-in LED and buzzer indicator 

• Built-in transceiver antenna 

• Battery power : 3V ( 2 x AAA battery ) 

• No external power is needed 

• Portable design / size : (115 x 70 x 30) mm 

Operation Manual – duplicate a EM4100 Card ID

[1] insert 2 x AAA battery

[2] power switch on (Power LED will flash per second) 

[3] Place a EM4100 or compatible card on the reader’s detection area . 

[4] press “Read” button , 

If the card format is correct , “Read” LED will on and “beep” 

(If the card is not supported , No response from the reader) 

[5] take away the EM4100 card and place a 125K RW card on the reader’s detection area. 

Press “Write” button about ~1-2 second “Write LED” will keep on , 

If write success , “write LED” will flash and beep 4 times. 

(If card type is incorrect , No response from the reader)